China Auto Industry Agricultural Machinery Metal Working Processing Axle Bushing Cylinder Spindle Plug Thread Pin Rod Machining Shaft Hardware Steel Roller Spare Part supplier

Solution Description

Company Profile

Company Profile

HangZhou Xihu (West Lake) Dis. Gain Equipment Co., Ltd., is a manufacture of precision machining from steel plates, castings & closed die forgings. It is launched in 2571 12 months, handles a total location of about 2000 sq. meters.
About fifty folks are used, like 4 engineers.

The business geared up with ten oblique CZPT CNC Lathes, 35 regular CNC lathes, 6 machining facilities, other milling devices and drilling machines.

The Products include design elements, automobile areas, health-related treatment, aerospace, electronics and other fields, exported to Japan, Israel & other Asian nations and Germany, the United States, Canada & other European and American nations around the world.

Certificated by TS16949 high quality management method.

Tools Introduction

Main facility and working assortment, inspection tools as adhere to

four axles CNC Equipment Middle 1000mm*600mm*650mm
Indirect Xihu (West Lake) Dis. CNC Equipment max φ800mm
max duration 700mm
Tolerance management inside of .01
One particular time clamping, higher precision
Turning-milling Compound Machining Center max φ800mm
max size 1000mm
Other CNC Lathe Whole thirty sets
Inspection Products CMM, Projector, CZPT Scale, Micrometer
Profiloscope, Hardness tester and so on

Indirect Xihu (West Lake) Dis. CNC Lathe

Equipped with ten sets of oblique CZPT CNC Lathes The highest diameter can be 400-500 mm Precision can achieve .01mm

Machining Heart

six sets of 4 axles machining centre, max SPEC: 1300*70mm, precision can get to .01mm

About Goods

Good quality Handle

 

We usually want to be specific, so verify dimensions right after every single manufacturing stage. We have senior engineers, experienced CNC operator, skilled quality inspector. All this helps make sure the closing products are substantial qualified.

Also can do third parity inspection accoring to customer’s reequirments, these kinds of as SGS, TUV, ICAS and so on.

Callipers/Top guage
Thread guage
Go/ no go guage
Within micrometer
Outside micrometer
Micron scale

CMM
Projector
Micrometer
Profiloscope
Hardness tester

 

 

Inspection Method

 

one. Before machining, the engineer will give away the technologies card for every single process acc. to drawing for top quality management.
2. In the course of the machining, the employees will check the proportions at every phase, then marked in the technological innovation card.
3. When machining completed, the expert testing staff will do 100% retesting again.

 

Packing Location

 

In basic, the merchandise will be packed in bubble wrap or divided by plywoods first of all.
Then the wrapped items will be set in the picket situations (no solid wood), which is permitted for export.
Areas can also be packed acc. to customer’s need.

To Be Negotiated 100 Pieces
(Min. Order)

###

After-sales Service: Compensate for Unqualified One
Warranty: 1 Year
Condition: New
Certification: ISO9001
Standard: DIN, ASTM, GOST, GB, JIS, BS
Customized: Customized

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

4 axles CNC Machine Center 1000mm*600mm*650mm
Oblique Guide CNC Machine max φ800mm
max length 700mm
Tolerance control within 0.01
One time clamping, high accuracy
Turning-milling Compound Machining Center max φ800mm
max length 1000mm
Other CNC Lathe Total 30 sets
Inspection Equipment CMM, Projector, Micron Scale, Micrometer
Profiloscope, Hardness tester and so on
To Be Negotiated 100 Pieces
(Min. Order)

###

After-sales Service: Compensate for Unqualified One
Warranty: 1 Year
Condition: New
Certification: ISO9001
Standard: DIN, ASTM, GOST, GB, JIS, BS
Customized: Customized

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

4 axles CNC Machine Center 1000mm*600mm*650mm
Oblique Guide CNC Machine max φ800mm
max length 700mm
Tolerance control within 0.01
One time clamping, high accuracy
Turning-milling Compound Machining Center max φ800mm
max length 1000mm
Other CNC Lathe Total 30 sets
Inspection Equipment CMM, Projector, Micron Scale, Micrometer
Profiloscope, Hardness tester and so on

How Metal Fabrication Benefits Agricultural Parts

agricultural parts

If you own an agricultural farm, you probably have a variety of different kinds of agricultural parts. These include tractors, hand tools, and other types of farm implements. Here, you’ll learn how to identify different parts and the importance of knowing what they do. Then, you can order them online to have them shipped directly to you. You can also contact different agricultural equipment dealers to find out where to buy agricultural parts. Regardless of where you get them, they’ll be worth the investment.
agriculturalparts

Metal fabricated agricultural parts

Regardless of the industry, metal fabricated agricultural parts can benefit a farm. For starters, metal fabricated parts are easier to replace than alternatives. Because metal is stronger than plastic, these parts can be made lighter. This means faster equipment movement and increased productivity. Metal can also be easily customized, allowing for a custom-made product. The benefits of metal fabrication extend far beyond the agricultural industry. Listed below are several of the benefits of using metal fabricated parts.
Agricultural equipment is exposed to harsh weather conditions. This is why it is imperative that metal fabricated agricultural parts are made with durable materials. Additionally, metal fabricated parts have a lower chance of corroding, which helps keep equipment running more efficiently. With such a long list of benefits, it’s easy to see why metal fabricated parts are so popular with farmers. And if your company needs agricultural equipment parts that can withstand the elements, you can depend on CZPT Industries.
Agricultural equipment requires metal parts that can withstand the rigorous workloads. As a trusted vendor, CZPT Manufacturing provides comprehensive metal fabrication services for agricultural equipment. With our advanced laser cutting services, you can rest assured that your metal parts are in good hands. You’ll be able to make adjustments without affecting the integrity of the metal. And thanks to our streamlined process, the quality of your fabricated parts is unrivaled.
Whether you need a custom fitout for a new piece of farm equipment, or a new design for an existing piece, metal fabrication can help. Custom fitouts not only improve the comfort of the operator, but also increase the durability of your farm machinery. Almost every type of metal fabrication process is used in the agricultural industry. These include brazing, welding, soldering, drilling, milling, and laser engraving.
As the manufacturing process of agricultural machinery becomes increasingly automated, sheet metal fabrication has become an important part of the production process. This process allows for more precise and accurate processing of holes of various shapes and sizes, and the cost of production is lowered significantly. Additionally, because of its precision and stability, sheet metal fabrication is perfect for farming. Moreover, it’s easy to teach and maintain automated processes. With these machines, farmers can make small batches easily, improving the efficiency of agricultural production.
agriculturalparts

Agricultural machinery manufacturers

Agricultural machinery is a highly technological industry with a large market for OEM parts. The demand for agricultural equipment is expected to reach $118.2 billion by 2025, which is higher than the previous forecast. Today, modern tech developments have increased the productivity and profitability of farms, making it more profitable to use farm equipment. Moreover, the availability of OEM parts is a key driving factor for the market growth. The agricultural equipment market will see continued growth as manufacturers focus on safety, quality, and consistent improvement of their products.
CZPT Corporation is an agricultural machinery manufacturer based in Duluth, Georgia. It was formed through a merger with CZPT in 1990. The company’s growth has been achieved through numerous acquisitions in farm machinery. It first acquired the CZPT forage and hay line from Fiat, which included a 50% share in a manufacturing joint venture with CZPT. Moreover, it acquired the White tractor business from CZPT Products to expand its dealer network.
Among the major factors contributing to the supply chain breakdown for farm equipment manufacturers is the outbreak of COVID-19. The pandemic has affected the supply chain in several ways, including reducing the availability of raw materials and component parts. It also has affected the labor force by causing temporary layoffs and illness. Furthermore, the shortage of steel is causing manufacturers to struggle to meet demand. As a result, the company has to delay shipments to meet customer demand.
In addition to the above factors, the rising cost of labor is another factor driving equipment sales. Using auto-guidance systems to match the yield of a crop is an effective way to maximize yield while minimizing environmental impact. Another major factor driving agricultural equipment sales is the increasing cost of agricultural labor across regions. This pay differential between industrial workers and those in the agricultural sector is one of the most common secular drivers for demand for agricultural equipment.
A large proportion of agricultural equipment is oversized for economic reasons. For instance, a combine can do three different processes at once. It can also travel across several states or even countries. The need for reliable transportation companies is another critical factor in the industry. The majority of companies in this industry are family-owned and operated. A good transportation network is essential to keep equipment on the road. This is a major challenge for the industry.
The European Union accounts for a large proportion of agricultural machinery manufacturing, with total output of 28 billion euros (2014). The top three countries for production are Germany, Italy, and France, with each country accounting for around 17 per cent of the global total. The majority of leading international manufacturers maintain several production sites across the continent. The products produced at these facilities are typically for high-end customers. They can also be purchased from a variety of independent sources.
agriculturalparts

Agricultural equipment dealers

Agricultural equipment dealerships are facing a changing landscape. Today’s consumers expect businesses to be online 24/7, have faster response times, and allow them to make payments more conveniently. To keep up with these expectations, more dealers are making the switch to mobile apps. These apps simplify all areas of business, from sales to service, and allow technicians to receive work orders directly on their mobile devices. In addition, the growth of ag equipment manufacturers is fueling the trend of consolidation among ag equipment dealers.
Video marketing is especially useful for agricultural equipment dealers. Agricultural equipment dealers can utilize video marketing from firms such as CZPT. Unlike text, video allows marketers to connect emotionally with their customers, by showing them a face. It is much more difficult to establish this connection through text, so video is a great way to reach potential customers. If a customer is satisfied with the process, they are more likely to buy from them again.
To succeed in sales of agricultural equipment, candidates should possess a combination of equipment knowledge, communication skills, and tenacity. Sales compensation packages for this industry are heavily based on commissions, so new salespeople should be prepared to work without a guaranteed monthly check. Agricultural equipment dealers should be ready for this kind of change in the coming years and prepare their sales funnels to make the transition. In addition, they should make sure that their phone numbers are prominently displayed.
The laws governing agricultural equipment dealers vary from state to state. These laws protect farm equipment dealers by outlining their rights as a supplier and a manufacturer. While these laws may have some commonalities, they do have some differences, which makes them essential to fully understand. Several procedures which are legal in one state may not be allowed in another. For this reason, it is vital that the dealer understand the laws of his state and be familiar with the relevant legislation.
The shortage of labor in the agriculture sector is a major challenge for many growers. But the shortage of labor could spur sales of robotics and automation equipment that simplify the farming process. With the right tools, a farm can run more efficiently and reduce its worker headcount. Therefore, the lack of labor will continue to be a major problem for agricultural equipment dealers. With this in mind, it is imperative to choose the right dealer for the job.
The influx of new equipment has made it difficult for agricultural equipment manufacturers to meet demand. Many companies have struggled to get implements to dealerships on time, making the overall situation even more complicated. Agricultural equipment dealers have to wait weeks or even months for their new machines to be delivered to farmers. A tractor from CZPT, for instance, can take five or six weeks to arrive in a dealership. It can now take 18 to 22 weeks, depending on the size of the order.

China Auto Industry Agricultural Machinery Metal Working Processing Axle Bushing Cylinder Spindle Plug Thread Pin Rod Machining Shaft Hardware Steel Roller Spare Part     supplier China Auto Industry Agricultural Machinery Metal Working Processing Axle Bushing Cylinder Spindle Plug Thread Pin Rod Machining Shaft Hardware Steel Roller Spare Part     supplier
editor by czh 2023-01-24

Recent Posts

pto part

As one of leading pto part manufacturers, suppliers and exporters of mechanical products, We offer pto part and many other products.

Please contact us for details.

Mail:sales@ptopart.top

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.